Verified codeset result
The manufacturer documentation publishes fault code P07 for the Evo270-1 wired controller fault display, mapped to the affected EvoHeat models listed below.
Fault code P07
EvoHeat Evo270-1 wired controller fault display: P07
Evo270-1 wired controller fault display
Last verified from the captured official source review.
P07 meaning for this display codeset
This page isolates EvoHeat fault code P07 for the Evo270-1 wired controller fault display. It does not combine the EvoHeat P07 meaning with another controller or codeset.
Before applying the EvoHeat P07 meaning, confirm the affected model uses the Evo270-1 wired controller fault display. In that controller namespace, P07 means documented as a refrigerant absorption temperature failure.
The EvoHeat Evo 270-1 Manual source anchor on page 15 supports this EvoHeat P07 record for the Evo270-1 wired controller fault display.
The permanent source key evoheat-evo270-1-display P07 keeps the evoheat-evo270-1-display P07 controller/code pairing distinct in publication.
What the documentation says
Documented as a refrigerant absorption temperature failure.
This is a paraphrase of the manufacturer’s documentation. A licensed technician confirms the actual cause.
Severity
Red means the documented fault involves safety-critical, leak, electrical, refrigerant, lockout or overheat language.
Source-grounded diagnosis context
Documented causes
The manual attributes the fault to an open or short-circuited evaporator temperature sensor.
Owner outcomes
What owners reported next
This aggregate appears after at least three structured reports for this exact codeset and code. Counts come from fixed choices only. Private notes are never shown here.
- Fixed
- Unit replaced
- Still unresolved
Repair, replacement and warranty context
Prioritise safety before the repair-or-replace decision
A red classification warrants urgent assessment by an appropriately licensed professional. The code alone cannot establish whether a component repair or full system replacement is proportionate.
This brand has a verified current Australian support route, so check warranty coverage with the manufacturer before authorising paid repair or replacement work.
Affected models
Every model mapped to this codeset is listed with the evidence match state used by this site.
Related codes from this codeset
These codes appear in the same documented controller or display codeset.
Choose the right next step
Warranty or local repair?
Answer both questions. If the unit may be covered, we will direct you to the manufacturer first. Your answers stay in this page unless you submit a repair request.
Choose both answers to see the recommended route.
Start with the manufacturer
The unit is under warranty or its coverage is uncertain, so no local repair lead form is shown. Ask the manufacturer about warranty support and keep proof of purchase.
Manufacturer route
Official support
Active support recorded
This brand is recorded as active in the Australian market.
EvoHeat's current Australian technical-support page offers hot-water help, service requests and warranty registration.
Status checked · Research source
Published Australian table for EVO150-1 and EVO270-1: 5 years tank, 2 years compressor and parts, and 1 year on-site labour.
Request local repair or replacement help
We will send this request to the site founder, who may share it with a suitable local provider only after you consent below. Submission does not guarantee provider availability.
Official source
Where this result comes from
EvoHeat. EvoHeat Evo 270-1 Manual, PDF page 15. Retrieved .