Exact model
Hydrotherm DYNAMIC/X8
Fault-code coverage and official support for this exact registered model.
Evidence-led introduction
About this exact model
Official scope evidence connects Hydrotherm DYNAMIC/X8 to the DYNAMIC/X8 controller display; the fault-code link on this page follows that documented controller relationship.
Evidence: Hydrotherm DYNAMIC/X8 GEN6 Owner Manual
The captured model material records controller family Touchscreen / Tuya and refrigerant R290 for Hydrotherm DYNAMIC/X8, details that help distinguish the exact variant rather than merely restating a family name.
Evidence: Hydrotherm DYNAMIC/X8 GEN6 Owner Manual, PDF page 8
The CER register lists Hydrotherm DYNAMIC/X8 as current, with eligibility recorded from 15 November 2019 to 31 December 2030; this dated status is separate from the controller evidence used for fault-code compatibility.
Evidence: CER ASHP item 425
Model record
Current register listing
Registry source: CER ASHP item 425.
Source-checked facts
Model specifications
Blank or ambiguous specifications are left out. Each value below points to its register record or captured manual page.
| Specification | Value | Source |
|---|---|---|
| CER listing status | Current | CER ASHP item 425 |
| CER eligible from | 15 November 2019 | CER ASHP item 425 |
| CER eligible to | 31 December 2030 | CER ASHP item 425 |
| Zone 1 certificates | 26 STCs | CER ASHP item 425 |
| Zone 2 certificates | 25 STCs | CER ASHP item 425 |
| Zone 3 certificates | 31 STCs | CER ASHP item 425 |
| Zone 4 certificates | 33 STCs | CER ASHP item 425 |
| Zone 5 certificates | 33 STCs | CER ASHP item 425 |
| Controller family | Touchscreen / Tuya | Hydrotherm DYNAMIC/X8 GEN6 Owner Manual, PDF page 8 |
| Dimensions | 620 × 1800 mm | Hydrotherm DYNAMIC/X8 GEN6 Owner Manual, PDF page 8 |
| Heating capacity | 3.45 kW | Hydrotherm DYNAMIC/X8 GEN6 Owner Manual, PDF page 8 |
| Power input | 1.2 kW | Hydrotherm DYNAMIC/X8 GEN6 Owner Manual, PDF page 8 |
| Refrigerant | R290 | Hydrotherm DYNAMIC/X8 GEN6 Owner Manual, PDF page 8 |
| Weight | 115 kg | Hydrotherm DYNAMIC/X8 GEN6 Owner Manual, PDF page 8 |
Real equipment references
Owner-submitted photos and installer references
Automated privacy moderation approved these equipment-only photos for this exact model context. Installer contributions show their submitted credit; owner photos remain generic. They are identification references, not repair instructions.
Duplicate register listing
The same model number is listed under a related brand
- Aquatech DYNAMIC/X8
Hydrotherm owner manuals name Aquatech Solar Technologies as the company warranting and servicing Hydrotherm-branded systems.
Relationship evidence: Hydrotherm DYNAMIC/X8 GEN6 Owner Manual
Evidence-backed coverage
Verified fault-code set
These links appear only when official documentation supports the model-to-controller connection.
DISPLAY codeset
DYNAMIC/X8 controller display
8 documented codes
Hydrotherm DYNAMIC/X8 GEN6 Owner Manual lists this covered model on page 1.
Manufacturer route
Official support
Active support recorded
This brand is recorded as active in the Australian market.
Hydrotherm's current Australian owner manual provides service and warranty contact instructions.
Status checked · Research source
DYNAMIC/X8 systems sold and installed in Australia: 6 years for system parts, tank and labour.