Exact model
Rinnai KSHP250M24R50H
Fault-code coverage and official support for this exact registered model.
Evidence-led introduction
About this exact model
Official scope evidence connects Rinnai KSHP250M24R50H to the Enviroflo S 5.0kW remote-controller flashing codes; the fault-code link on this page follows that documented controller relationship.
Evidence: Rinnai Enviroflo S 5.0kW Operation and Installation Manual
The captured model material records refrigerant R32 and heating capacity 5 kW for Rinnai KSHP250M24R50H, details that help distinguish the exact variant rather than merely restating a family name.
Evidence: Rinnai Enviroflo S 5.0kW Operation and Installation Manual, PDF page 14
The CER register lists Rinnai KSHP250M24R50H as current, with eligibility recorded from 5 March 2025 to 31 December 2030; this dated status is separate from the controller evidence used for fault-code compatibility.
Evidence: CER ASHP item 868
Model record
Current register listing
Registry source: CER ASHP item 868.
Source-checked facts
Model specifications
Blank or ambiguous specifications are left out. Each value below points to its register record or captured manual page.
| Specification | Value | Source |
|---|---|---|
| CER listing status | Current | CER ASHP item 868 |
| CER eligible from | 5 March 2025 | CER ASHP item 868 |
| CER eligible to | 31 December 2030 | CER ASHP item 868 |
| Zone 1 certificates | 26 STCs | CER ASHP item 868 |
| Zone 2 certificates | 27 STCs | CER ASHP item 868 |
| Zone 3 certificates | 32 STCs | CER ASHP item 868 |
| Zone 4 certificates | 34 STCs | CER ASHP item 868 |
| Zone 5 certificates | 34 STCs | CER ASHP item 868 |
| Heating capacity | 5 kW | Rinnai Enviroflo S 5.0kW Operation and Installation Manual, PDF page 14 |
| Power input | 0.9 kW | Rinnai Enviroflo S 5.0kW Operation and Installation Manual, PDF page 14 |
| Refrigerant | R32 | Rinnai Enviroflo S 5.0kW Operation and Installation Manual, PDF page 14 |
Real equipment references
Owner-submitted photos and installer references
Automated privacy moderation approved these equipment-only photos for this exact model context. Installer contributions show their submitted credit; owner photos remain generic. They are identification references, not repair instructions.
Evidence-backed coverage
Verified fault-code set
These links appear only when official documentation supports the model-to-controller connection.
LED_BLINK codeset
Enviroflo S 5.0kW remote-controller flashing codes
25 documented codes
Rinnai Enviroflo S 5.0kW Operation and Installation Manual lists this covered model on page 1.
Manufacturer route
Official support
Active support recorded
This brand is recorded as active in the Australian market.
Rinnai Australia's current support library provides heat-pump error-code and service routes.
Status checked · Research source
Warranty varies by Enviroflo line: S 5.0kW split has 10 years cylinder parts and 5 years compressor parts; current A and AR/GR lines publish 7 years cylinder and 5 years refrigeration components, with 1 year other components.