Exact model
Rinnai EHPA250VMAH
Fault-code coverage and official support for this exact registered model.
Evidence-led introduction
About this exact model
The mapping review separates Rinnai EHPA250VMAH from the covered EHPG265VM model because the official evidence identifies a different or ambiguous controller generation.
Evidence: Official model evidence
The CER register lists Rinnai EHPA250VMAH as current, with eligibility recorded from 22 March 2021 to 31 December 2030; this dated status is separate from the controller evidence used for fault-code compatibility.
Evidence: CER ASHP item 815
Model record
Current register listing
Registry source: CER ASHP item 815.
Source-checked facts
Model specifications
Blank or ambiguous specifications are left out. Each value below points to its register record or captured manual page.
| Specification | Value | Source |
|---|---|---|
| CER listing status | Current | CER ASHP item 815 |
| CER eligible from | 22 March 2021 | CER ASHP item 815 |
| CER eligible to | 31 December 2030 | CER ASHP item 815 |
| Zone 1 certificates | 26 STCs | CER ASHP item 815 |
| Zone 2 certificates | 25 STCs | CER ASHP item 815 |
| Zone 3 certificates | 31 STCs | CER ASHP item 815 |
| Zone 4 certificates | 32 STCs | CER ASHP item 815 |
| Zone 5 certificates | 30 STCs | CER ASHP item 815 |
Manual review: Captured manuals for this sourced brand do not explicitly cover this exact registry model, so no specification was transferred from a sibling.
Real equipment references
Owner-submitted photos and installer references
Automated privacy moderation approved these equipment-only photos for this exact model context. Installer contributions show their submitted credit; owner photos remain generic. They are identification references, not repair instructions.
Honest coverage status
No verified public codes for this model
Rinnai has source-verified codes for some models, but no public codeset is evidenced for EHPA250VMAH. Codes from another model may have different meanings.
Different or ambiguous controller generation
Rinnai’s official Series 2 EHPA manual lists EHPA250VMAH and documents a 1–7 LED-flash diagnostic controller, which is a different interface and code set from the mapped Enviroflo AR/GR display.
Model mapping checked .
Nearest covered sibling model
These links are for comparison only; their codes are not assigned to this model.
Coverage checked .
Manufacturer route
Official support
Active support recorded
This brand is recorded as active in the Australian market.
Rinnai Australia's current support library provides heat-pump error-code and service routes.
Status checked · Research source
Warranty varies by Enviroflo line: S 5.0kW split has 10 years cylinder parts and 5 years compressor parts; current A and AR/GR lines publish 7 years cylinder and 5 years refrigeration components, with 1 year other components.